The mechanical reinforcing mesh production line is mainly used for producing construction reinforcing meshes.
Feeding mode: warps and wefts required by the equipment are pre-sheared by an automatic straightening cutting machine, the warps are placed on a corresponding wire penetrating mold by workers, and the wefts are placed into a special accommodation groove and are controlled for automatic blanking through a servo motor.
Welding: The main machine starts welding: the machine adopts a synchronous control technology, both branch control welding time and welding time are controlled by a PLC digital programming system, and the pore size can be adjusted only by direct input on a touch screen control panel; a welding process is finished on the basis of spring pressurization.
Welding finish: The servo motor controls an automatic mesh drawing process until the whole mesh is welded, and the automatic mesh connecting and discharging system is started; the welding of the next mesh is started.
Technical parameters
| Wire diameter | 6mm-12mm | Warp feeding | Pre-shearing |
| Weft distance | Min 50mm | Weft feeding | Pre-shearing |
| Warp distance | 100mm-300mm | Power supply | AC380V-440V |
| Warp quantity | 26 | Welding width | 2500mm |
| Mesh length | 6m | Welding speed | 45 times∕min |
| Dimensions | 10*3.4*1.6（m） |
why choose my welding mesh machine:
1, all electrical spares we use Panasonic (Japan)
PLC
Weinview (Taiwan) touch screen
Schneider (France) low-voltage apparatus
ABB (Switzerland Sweden) switch
Schneider (France) air switch
Omron (Japan) power supply
Delta (Taiwan) Variable-frequency Drive
Autonics (South Korea) encoder
Panasonic (Japan) servos
what u would like to know?
Q:
What's the machine price?
A: We need to know your wanted wire diameter, mesh hole size and mesh width.
Q: What's the production capacity?
A: The production capacity mainly depends on the welding speed and cross wire
space.
Q: Can you make voltage according to my requirement?
A: yes, we can make 3 phase, 380V/220V/415V/440V, 50Hz or 60Hz etc.
Q: What's the payment terms?
A: 30% T/T in advance, 70% T/T before shipment, or 100% irrevocable L/C at
sight, or cash etc. It is negotiationable.
DZ machine advantages:
1. This machine adopts synchronous control technique. The center-control and welding time are composed of digital and integrated electric circuit.
2. The operation is accurate, it has stable function, firm welded point, and without welded tracks.
3. Not only welding speed is fast, it is easy to learn and operate. Only need two workers.
4. The longitude wires are fed from rolls and through precise wire straightening and positioning device.
5. Step motor controls fallen cross structure and drawing materials are automatic.
6. It’s accurate, the edge of mesh are regular, it’s unnecessary to slice the side.
7. Drawing mesh adopts the device with the elastic link and fixing the mesh.
8. It’s easy to regulate the mesh holes and mesh size is rather accurate, welding aperture could be adjustable randomly within range.
9. The finished mesh could be in rolls or in panels.
